Bestek Ford Escort Mk1 Mk2 X-flow Billet Distributor & Electronic Ignition Kit

  

BESTEK COMPLETE ELECTRONIC IGNITION KIT WITH BILLET DISTRIBUTOR. FORD KENT X-FLOW ENGINES ONLY. SUITABLE FOR THE FOLLOWING MODELS. ESCORT MK1/2 1.1, 1.3, 1.6 KENT X-FLOW.

1.3, 1.6 KENT X-FLOW. 1.1, 1.3, 1.6 KENT X-FLOW.

This is complete Electronic Ignition kit designed for modified engines with Twin Carbs, a Side Exit Distributor Cap is supplied for clearance. The Cap Supplied has been specially selected as a near perfect fit on the distributor body to maximise timing accuracy and rotor arm centricity. No Vacuum advance capsule is fitted to avoid detonation problems, there is also no convenient, pulse free vacuum take off on Twin Carb inlet manifolds. The wiring loom supplied is " Plug & Play " with waterproof multiplugs for the Distributor, Amplifier and Coil.

Only an Earth (Black wire with eyelet terminal), Ignition Live (Red wire) and Rev Counter connections need to be made. IMPORTANT: This system requires a 12v feed for the coil, if your car is fitted with a Ballast Resistor (or Resistance Wire) this will need to be removed as it will drop the Voltage to 6v - 8v. As a Special Order, the kit can be supplied with more/less distributor centrifugal advance and a Top Exit Cap, this may take a day or two longer to despatch - please ask.

Wiring Loom with Waterproof plugs. Recommended Static Timing - 8° to 12° BTDC. Top of the range Billet hall trigger complete ignition kit.

Precise 90 degree divisions and no high RPM ignition retard. Designed for Road, Track & High Performance use. Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)!

Products listed as universal fitment are not designed for any one model.